BZBGear Auto Tracking Full HD 3G SDI Live Streaming PTZ Camera with 12x Zoom

Camera and Connections

The chassis of the BG-LVUPTZ-SD contains two separate cameras. In addition to the moving PTZ head, there is a wide-angle panoramic camera with a separate output. This provides users with two simultaneous Full HD video signals. Each camera is equipped with simultaneous 3G-SDI and IP streaming outputs. This versatile camera gives a single user access to both widescreen and close-up angles, enabling them to create dynamic content without the assistance of a dedicated camera operator. ONVIF, RTSP, and RTMP protocols enable operators to stream the video output directly from the BG-LVUPTZ-SD to online streaming services like Facebook and YouTube. The 3.5mm audio input allows stereo sound to be embedded into the video signals.

Configuration

Configuration is a breeze with BZBGEAR’s wizard-based setup utility, BG-Autotrak. Customizable options allow users to fine-tune the camera’s performance to suit their environment. When tracking mode is disabled, the BG-LVUPTZ-SD can also be controlled by RS232, RS485, IP commands, and IR remote. This camera supports SRT, enabling high-quality, low-latency video to be sent reliably over the internet.

LAN Cam-2

Connect Camera-2 to a network switch via category cable to control (TCP/IP or WebGUI) and stream.

HD-SDI CAM2

Connect to an SDI device up to 330-feet such as a video production switcher or a video display at resolutions up to 3G (1080 60Hz) over SDI cabling to view a close-up lens.

HD-SDI CAM1

Connect to an SDI device up to 330-feet such as a video production switcher or a video display at resolutions up to 3G (1080 60Hz) over SDI cabling to view (panorama lens).

RS-232

Connect RS-232 to control the camera with a joystick controller or control software.

A-In

Connect external audio sources such as a microphone or small audio mixer to embed the sound into all video output interfaces.

LAN Cam-1

Connect Camera-1 to a network switch via category cable to control (TCP/IP or WebGUI) and stream.

Power

Connect supplied 12V power adapter.

What's in the Box

• BZBGear Auto-Tracking 1080P Full HD 3G-SDI Live Streaming PTZ Camera with 12x Zoom
• 12V/1.5A Power supply
• RS232 Control Line
• Remote Control
• User Manual
• Limited 3-Year Warranty

Specifications

BZBGear Auto-Tracking 1080P Full HD 3G-SDI Live Streaming PTZ Camera with 12x Zoom

Tracking Camera, Lens Parameters

• Image sensor: 1/2.8-inch high-quality CMOS sensor
• Effective pixels: 2,070,000 16:9
• Video signal: 1080p 60/50/30/25/59.94/29.97, 1080i 60/50/59.94, 720p 60/50/30/25 /59.94/29.97
• Lens optics zoom: 12x optical zoom f-4.7 to 94mm
• Visual angle: 2.9-degree (narrow angle) 55.4-degree (wide angle)
• Aperture coefficient: F1.6 to F3.5
• Digital zoom: 10x
• Minimum illumination: 0.5Lux (F1.8, AGC ON)
• Digital noise reduction: 2D and 3D digital noise reduction
• White balance: Manual/auto/one-key white balance /3000K/ 4000K/5000K/6500K
• Focus: Auto/manual
• Aperture: Auto/manual
• Electronic shutter: Auto/manual
• Backlight compensation: On/off
• Wide dynamic: Off/dynamic grade adjustment
• Video regulation: Brightness, hue, saturation, contrast ratio, sharpness, Gamma
• Signal-to-noise ratio: >55dB

Panoramic Lens

• Image sensor: 1/2.8-inch high-quality CMOS sensor
• Effective pixels: 2,100,000
• Lens: Manual focus
• Output port: Network port, HDMI, USB
• Field angle (D/H/V): 112-degree/82-degree/57.6-degree

Input/Output Port and Support Protocol

• Video port: HDMI
• Network port: 100M internet access (10/100BASE-TX) 5GWiFi (optional), support network VISCA control protocol
• Network protocol: RTSP, RTMP, ONVIF, GB/T28181
• Compression image code stream: Dual stream output
• Video compression format: H.265, H.264
• Control signal port: RS-232/485
• Control protocol: VISCA/Pelco-D/Pelco-P; Baud rate: 115,200/9,600/4,800/2,400bps
• Audio input port: Dual track 3.5mm linear input
• Audio compression format: AAC, MP3, PCM
• Power port: HEC3800 power socket (DC12V)

Holder Parameters

• Horizontal rotation: -170 to +170-degree
• Vertical rotation: -30 to +90-degree
• Horizontal control speed: 0.1 to 100-degree/s
• Vertical control speed: 0.1 to 45-degree/s
• Preset speed: Horizontal: 100-degree/s, vertical: 45-degree/s
• Preset quantity: User can set 255 presets at most (10 pcs of mobile control)

Other Parameters

• Power adapter: Input AC110V-AC220V output DC12V/2.5A
• Input voltage: DC12V±10%
• Input current: 1.5A (maximum)
• Power consumption: 18W (maximum)
• Storage temperature: -10 to +60-degree-C
• Storage humidity: 20 to 95%
• Operating temperature: -10 to +50-degree-C
• Operating humidity: 20 to 80%
• Dimension: (W x H x D): 254 x 144 x 174mm
• Weight (approx.): 3.3 lb (1.50 kg)
• Operating environment: Indoor
• Remote maintenance (network port): Remote upgrade, restart and reset

AQ/