Magewell USB Capture HDMI 4K Plus

The device also offers a variety of processing and other features, including resolution scaling and deinterlacing. It also has a status LED for displaying the status of the input, including idle, input signal locked, memory failed, or FPGA configuration.

Note:

Please use the included Magewell USB 3.0 cable, which is a custom accessory. Using any other similar cable might cause capture problems and even damage the capture device.

Key Features

• HDMI 2.0/1.4 input and loop-through, audio in/out, USB 3.0 computer interface
• Capture up to 4096 x 2160, 4:4:4, 60 fps
• Compatible with Windows, Mac, Linux, and Chrome OS
• Plug-and-play operation
• UVC protocol support
• Up/down scaling
• Deinterlacing
• Image control
• Various output color spaces
• Firmware upgradeable
• Multiple devices on one host

Included USB Capture Utility V3

• Capture format setting
• Audio volume control
• Mirror and flip
• EDID editing and importing
• Firmware update
• Export diagnose report
• Other functions, such as cropping, deinterlacing, and device name setting

HDMI Specific Features

• 600 MHz HDMI receiver
• Adaptive HDMI equalizer
• Customized EDID
• Extraction of AVI/Audio/SPD/MS/VS/ACP/ISRC1/ISRC2/Gamut InfoFrames
• Full colorimetry support
• Up to 4096 x 2160 4:4:4 60 fps input signals
• 2 channel ISC60958 audio streams
• Extraction of audio formation information and channel status data
• Extraction of video timing information
• Extraction of 3D format information
• Side-by-side half, top-and-bottom, and frame packing 3D mode

Analog Audio Features

• Extraction of stereo embedded HDMI audio for recording and output via 3.5mm stereo mini-jack
• Capture of analog audio via 3.5mm input jack (mic level)
• Playback audio via 3.5mm headphone jack

Video Capture Formats

• Capture resolutions up to 4096 x 2160
• Capture frame rates up to 120 fps (actual capture frame rate can be limited by USB bandwidth and internal working frequency; typical capture frame rates on the Intel USB 3.0 controller are as follows: 1920 x 1080 YUY2 at up to 90 fps, and 3840 x 2160 NV12 at up to 30 fps)
• NV12 and I420 4:2:0 8-bit (up to 4096 x 2160)
• YUY2 and UYVY 4:2:2 8-bit (up to 4096 x 2160)
• RGB24 and RGB32 4:4:4 8-bit (up to 2048 x 2160)
• Default capture formats are YUY2 and NV12; more capture formats can be set using the included USB Capture Utility software

Video Processing Features

• Video processing pipelines with 640 megapixels processing bandwidth
• Cropping
• Scaling
• Frame rate conversion
• Vertical flip and mirror

Video Deinterlacing

• Weave
• Blend top and bottom field
• Top field only
• Bottom field only

Aspect Ratio Conversion

• Auto or manual selection of input aspect ratio
• Auto or manual selection of capture aspect ratio
• Three aspect ratio conversion modes: Ignore (Anamorphic), Cropping, or Padding (Letterbox or Pillarbox)

Color Format Conversion

• Auto or manual selection of input color format and quantization range
• Auto or manual selection of capture color format, quantization range, and saturation range
• Support for RGB, YCbCr 601, and YCbCr 709 color formats
• Support for limited or full quantization range
• Support for limited, full, and extended gamut saturation range

Multiple Devices On One Computer

• Connect multiple units to one system
• Set the device serial number as the device name shown in the system using the USB Capture Utility

SDK

• USB Capture SDK provide functions including signal status extraction, capture configuration, etc.

-S