Having trouble setting up your Hyzom extender? No worries, these are common issues and are mostly easy to fix. If you cannot connect to the extender, make sure you are connected to its default WiFi network (usually labeled on the device). Next, either open a fresh tab and enter 192.168.10.1 to open the setup page on your browser. If the setup page doesn’t come up, try a different browser or device and, if on a smartphone, disable mobile data. Another issue might be a weak signal post-setup, an indicator that the extender might be too far away from your main router. To improve coverage, position it halfway in-between your router and the dead zone. If the WPS button does not work, press and hold it for 5 to 10 seconds, making sure the router’s WPS setting is enabled. By taking these simple actions, most problems related to the Hyzom extender setup can be solved swiftly, and your WiFi will be up and running. Remember to regularly check for firmware updates for the best results.