How many times have you tried to use your HP laptop only to end up on a stuck screen? A few minutes go by, and nothing occurs. Sound familiar? You’re not alone. Many users face the dreaded HP laptop preparing automatic repair screen that seems to loop endlessly. 

You may have the feeling that your system is not changing. There is no need to panic though, your laptop is not dead. This guide will take you through the five easiest steps to fix the problem and bring your device back without any stress, costly repairs, and lost time.

What Causes the “HP Laptop Preparing Automatic Repair” Loop?

When you find yourself in a continuous cycle of the “HP Laptop Preparing Automatic Repair” loop, then normally your system is attempting to clean up an issue that it cannot solve itself. There are many other forces behind this loop including software bugs, as well as hardware failures.

Some of the most frequent causes are the following:

• Corrupted system files
• Failed Windows update
• Hard drive issues
• Malware or viruses
• Driver conflicts
• Improper shutdown
• Damaged boot files
• Problematic software

How to Troubleshoot HP Laptop Preparing Automatic Repair in 5 Steps

The automatic repair loop issue of your HP laptop can be diagnosed and fixed using these five easy steps.

Step 1: Perform a Hard Reboot

This simple trick often does the job.

1. Turn off your HP laptop.
2. Unplug all external devices.
3. Press and maintain the power button for 15 seconds.
4. Reboot and get back to see if your problem is gone.

This breaks minor boot loop errors and could skip the preparing automatic repair HP laptop cycle entirely.

Step 2: Boot into Safe Mode

When your HP laptop stuck on preparing automatic repair, hit the power button, then hit it once more when you see the HP logo. Do this 2–3 times to trigger recovery mode.

From there:

• Go to Advanced Options
• Click Startup Settings
• Select Safe Mode with Networking

Now your system should boot without the repair loop.

Step 3: Use System Restore

If Safe Mode works, use this feature to roll back your system.

1. In the Advanced Options, select System Restore.
2. Choose a date before the problem began.
3. Let your laptop do its thing.

This can be a lifesaver, especially if your HP laptop preparing automatic repair then black screen appears after a recent update.

Step 4: Run Command Prompt Fixes

This step is for when your HP laptop stuck in preparing automatic repair and won’t budge. Boot into Advanced Options > Command Prompt, then type these commands one by one:

bootrec /fixmbr  

bootrec /fixboot  

bootrec /scanos  

bootrec /rebuildbcd  

These commands repair damaged boot files that might produce the loop.

Step 5: Reset Your HP Laptop (Last Resort)

If everything else fails:

1. From the Advanced Options menu, select Reset this PC.
2. Choose Keep my files to avoid losing data.
3. Let the system reinstall Windows.

This ends the preparing automatic repair on HP laptop error for good.

Ready to Fix It? Don’t Wait Another Minute

There’s no time to waste—your productivity is on hold. The longer you leave it, the more frustrating it gets. These are 5 effective ways to break out of the HP laptop preparing automatic repair loop for once and for all.

Not decided or haven’t got a clue yet? Don’t risk your data. Call our expert team now for a quick rescue, your fully functioning laptop could be just a phone call away.